Removal and Replacement

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

CAUTION:
- When replacing the instrument cluster, the configuration procedure must be performed before removing the instrument cluster. Replacing the instrument cluster without performing the configuration procedure will result in system malfunction.

1. Perform the instrument cluster configuration when replacing it. Programming and Relearning

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Front scuff plate (Driver side) Front Scuff Plate Removal/Installation

b. Front side trim (Driver side) Front Side Trim Removal/Installation

c. Upper panel Upper Panel Removal/Installation

d. Decoration panel (Driver side) Decoration Panel Removal/Installation

e. Hood release lever Service and Repair

f. Meter hood Meter Hood Removal/Installation

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.

6. Program the immobilizer system-related parts when replacing the instrument cluster. (With keyless entry system) Keyless Entry System

CAUTION:
- The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.