Fog/Driving Lamp: Adjustments

FRONT FOG LIGHT AIMING

1. Make a front fog light adjustment screen as shown in the figure using double-weight, white paper.






2. Adjust the tire pressure to the specification.

3. Position the unloaded vehicle on a flat, level surface.

4. Seat one person in the driver's seat.

5. Line up the front fog lights with the white screen at a distance of 3 m {9.8 ft} apart.






6. Place an object in front of the fog light not being adjusted to block its light beam.

7. Start the engine so that the battery remains charged.

8. Turn the front fog lights on.

9. Remove the adjusting bolt and cut the front fog light hole cover at the position shown in the figure.






10. Loosen the screw, move the front fog light in the direction of the arrows, and adjust the center of the front fog light to the position shown in the figure.

11. Install the adjusting bolt and tighten the screw.