DSC/RSC HU Air Bleeding

DSC/RSC HU AIR BLEEDING

1. Turn the ignition switch off.

2. Connect the M-MDS to the DLC-2.






3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Chassis".
2 Select "Braking".

- When using the PDS (Pocket PC)

1 Select "All Tests and Calibrations".

4. Then, select items from the screen menu in the following order.

- Select "ABS Service Bleed"

5. Perform the air bleeding according to the directions on the screen.