Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> CX-9 AWD V6-3.7L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Tightening Torque & Sequence >> Crankshaft Pulley
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Pulley

Crankshaft Pulley Lock Bolt Installation Note

1. Rotate the crankshaft clockwise, and set a wrench to the drive plate bolt at the position shown in the figure to lock the crankshaft rotation.






2. Tighten the new crankshaft pulley lock bolt in 4 steps.
a. Tighten to 140 Nm {14 kgf-m, 103 ft-lbf}.

b. Loosen 360 ° (one full turn) in reverse order.

c. Tighten to 47-53 Nm {4.8-5.4 kgf-m, 35-39 ft-lbf}.

d. Tighten 85 °-95 °.

3. Verify the tightening torque for the drive plate bolt to which the wrench has been set. Service and Repair

4. Install the cover as shown in the figure.




pro multis · About Operation CHARM