Accessory Socket Removal/Installation

ACCESSORY SOCKET REMOVAL/INSTALLATION

Front

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Decoration panel Decoration Panel Removal/Installation

b. Front console box mat Front Console Box Mat Removal/Installation

c. Indicator panel Service and Repair

d. Front console box Front Console Box Removal/Installation

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Center

1. Disconnect the negative battery cable.

2. Remove the console panel. Console Panel Removal/Installation

3. Remove the console. Console Removal/Installation

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.

Rear

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Trunk box

b. Seat side box Seat Side Box Removal/Installation

c. Trunk end trim Trunk End Trim Removal/Installation

d. Third-row seat Third-Row Seat Removal/Installation

e. Rear scuff plate inner (RH) Rear Scuff Plate Removal/Installation

f. Third-row seat belt lower anchor installation bolt (RH) Third-Row Seat Belt Removal/Installation

g. Trunk side trim (Passenger side)

3. Remove the console panel. Console Panel Removal/Installation

4. Remove the console. Console Removal/Installation

5. Remove in the order indicated in the table.










6. Install in the reverse order of removal.

Accessory Socket Removal Note

1. While pressing a tape-wrapped flathead screwdriver against the cap projection, pull the accessory socket outward.






Cap Removal Note

1. While pressing the tabs, pull the cap outwards.