Rear Stabilizer Removal/Installation

REAR STABILIZER REMOVAL/INSTALLATION [AWD]

1. Remove the presilencer. Service and Repair

2. Remove the presilencer insulator.






3. Remove the propeller shaft. Service and Repair

4. Remove the rear ABS wheel-speed sensor. Rear ABS Wheel-Speed Sensor Removal/Installation

5. Remove the rear coil spring. Rear Suspension

6. Remove in the order indicated in the table.

7. Install in the reverse order of removal.










Rear Stabilizer Component Removal Note

1. Support the rear differential using a jack.






2. Remove the rear differential mounting bracket (front) installation bolts.






3. Tilt the rear differential towards the front.

4. Remove the rear stabilizer from through the gap between the rear differential and rear crossmember.

Rear Stabilizer Installation Note

1. Install the rear stabilizer so that the identification mark faces the right side of the vehicle.