Front Door Window Regulator: Service and Repair

FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Inner garnish Inner Garnish Removal/Installation

b. Front door trim Front Door Trim Removal/Installation

c. Front door speaker Front Door Speaker Removal/Installation

d. Front door glass Service and Repair

e. Power window motor Service and Repair

3. Remove the nuts.






4. Insert a hand through the speaker installation hole, rotate the drum housing in the direction shown in the figure to detach the tabs from the front door module.






5. Move the front power window regulator in the direction of the arrow and remove it.






6. Install in the reverse order of removal.

CAUTION:
- Make sure the cable does not unspool from the drum housing when installing.