Pinpoint Test 12: The Satellite Radio Is Inoperative/Does Not Operate Correctly
PINPOINT TEST 12: THE SATELLITE RADIO IS INOPERATIVE/DOES NOT OPERATE CORRECTLY
Normal Operation
Digital signals are received by the satellite radio antenna and sent to the audio control module (ACM) through the satellite radio antenna cable. The satellite receiver is internal to the ACM.If there is an open in the satellite radio antenna circuit, there is no satellite audio. The audio system display indicates a satellite antenna concern when the audio system is operated in satellite radio mode. To diagnose an open in the satellite radio antenna circuit, see - Pinpoint Test 13: Poor Reception/Poor Sound Quality/No Sound - Satellite Audio.
- DTC U2014:96 (Control Module Hardware: Component Internal Failure) - sets when the ACM detects an internal fault to the built-in satellite radio receiver. This results in complete loss of satellite radio functionality.
Possible Causes
- Subscription status
- ACM
Diagnostic Procedure
