Liftgate Release Switch - Liftgate Glass Removal/Installation

-
LIFTGATE RELEASE SWITCH - LIFTGATE GLASS REMOVAL/INSTALLATION










1. Remove the liftgate trim panel. See .

2. Remove the 4 liftgate trim bezel nuts and remove the bezel from the liftgate.

- Disconnect the liftgate glass release electrical connector.
- Using an appropriate tool, press the tabs and remove the liftgate glass release switch.
- To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.

3. To install, reverse the removal procedure.