Voltage Inverter: Service and Repair

-
DIRECT CURRENT/ALTERNATING CURRENT (DC/AC) INVERTER REMOVAL/INSTALLATION - HYBRID










1. Disconnect the 12-volt battery. See Battery Disconnect.






2. Remove the lower LH center instrument panel finish panel.

3. Disconnect the electrical connectors from the DC/AC inverter.

4. Remove the 2 DC/AC inverter nuts.

- To install, tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}.

5. Remove the DC/AC inverter bolt.

- To install, tighten to 11 Nm {1.1 kgf-m, 97 in-lbf}.

6. Remove the DC/AC inverter.

7. To install, reverse the removal procedure.