Resonator: Service and Repair

-
AIR INTAKE RESONATOR REMOVAL/INSTALLATION - HYBRID

1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.

2. Remove the LF wheel and tire.






3. Remove the 9 fasteners and position aside the LH fender splash shield.

4. Remove the bolt and air intake resonator.

- To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.

5. To install, reverse the removal procedure.

NOTE:Make sure that the front rubber grommet is seated in the bracket.