Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/C Unit Disassembly/Assembly - Full-Auto Air Conditioner




A/C UNIT DISASSEMBLY/ASSEMBLY [FULL-AUTO AIR CONDITIONER]

1. Disassemble in the order indicated in the table.

CAUTION:
- If a non-specified grease is used, it may result in abnormal noise or improper operation of the links. Apply only the specified grease to each link.

2. Assemble in the reverse order of disassembly.










Sensor Clamp Assembly Note

1. Assemble the evaporator temperature sensor as shown in the figure.






CAUTION:
- When installing the evaporator temperature sensor without newly replacing the evaporator, assemble the evaporator temperature sensor with the installation position slid to the right of the previous position by 1 line. If the evaporator temperature sensor is assembled to the previously installed position, it may not function due to poor contact of the fin surface with the sensor detection area caused by fin deformation.

NOTE:
- Newly replace an evaporator in which the evaporator temperature sensor cannot be correctly positioned.

Adhesive Polyurethane (5) Assembly Note

1. Assemble the adhesive polyurethane (5) as shown in the figure.






Adhesive Polyurethane (4) Assembly Note

1. Assemble the adhesive polyurethane (4) as shown in the figure.






Adhesive Polyurethane (3) Assembly Note

1. Assemble the adhesive polyurethane (3) as shown in the figure.