Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
B0002:1B
DTC B0002:11/B0002:12/B0002:1A/B0002:1B
System Malfunction Location
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Abnormal resistance (other than 1.5-4.1 ohms) detected in the driver-side air bag module (inflator No.2) circuit
- Malfunction in the wiring harness between the driver-side air bag module (inflator No.2) and SAS control module
Possible Causes
- Driver-side air bag module (inflator No.2) connector malfunction
- Open or short circuit or short to ground or short to power supply in the wiring harness between the clock spring and SAS control module
- Clock spring malfunction
- Driver-side air bag module (inflator No.2) malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1-Step 2:
Step 3-Step 4:
