Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

On-Board System Readiness Tests Access Procedure

ON-BOARD DIAGNOSTIC TEST [MZI-3.7]

On-Board System Readiness Tests Access Procedure

1. Connect the M-MDS to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Powertrain".
- Select "OBD Test Modes".
- Select "Mode 1 Powertrain Data".
- Select "PCM".

- When using the PDS (Pocket PC)

- Select "OBDII Modes".
- Select "Mode 1 Powertrain Data".
- Select "PCM".

3. Then, select the "***SUP" and "**EVAL" PIDs in the PID selection screen.

4. Monitor those PIDs and check it system monitor is completed.

NOTE:
- If the on-board system readiness tests are not completed the PCM stores DTC P1000:00.