Basic Power Window System Inspection

BASIC POWER WINDOW SYSTEM INSPECTION [POWER WINDOW SYSTEMS (AUTO-OPEN/CLOSE FUNCTION)]

Manual Mode Function Inspection

Step 1-Step 4:

Automatic Mode Function Inspection

NOTE:
- Perform the following inspection for the power window main switch and the passenger's side power window subswitch for each window.

Step 1-Step 3:

Automatic Door Glass Return Function Inspection

NOTE:
- Perform the following inspection for the power window main switch and the passenger's side power window subswitch for each front door window.
- With the switch held at auto-up, the driver's and passenger's side front door glass do not automatically reverse even when a foreign object is encountered.

Step 1-Step 2:

IG OFF Timer Function Inspection

Step 1-Step 4:

Step 5:

Two-step Down Function Inspection

- Before inspecting the two-step down function, make sure that the two-step down function is turned on (if the two-step down function is turned off, the power window close not stop once.).
- The distance the driver's and passenger's side front door glass opens can be changed using the two-step down function (approx. 20-100 mm {0.79-3.93 in}).
- The two-step down function can be made inoperative. (The function is operative at the initial setting.)
- The two-step down function does not function during IG OFF timer.

NOTE:
- Perform the following inspection for the power window main switch and the passenger's side power window subswitch for each front window.

Step 1: