Accelerator Pedal: Service and Repair

-
ACCELERATOR PEDAL REMOVAL/INSTALLATION - HYBRID









NOTE:The accelerator pedal bracket and bolts on the 2.5L and 3.0L vehicles are similar but not interchangeable with the 2.5L Hybrid vehicles.
1. Disconnect the battery ground cable. See - Service and Repair.

2. Remove the 3 bolts and the accelerator pedal and sensor assembly.

- To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.

3. To install, reverse the removal procedure.