Seat Bladder: Service and Repair

LUMBAR ASSEMBLY REMOVAL/INSTALLATION

NOTE:The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a SRS fault.
NOTE:The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
1. Depower the SRS. See Supplemental Restraint System (SRS) Depowering and Repowering.

2. Remove the front seat backrest cover. See Front Seat Backrest Cover Removal/Installation.

3. Remove the backrest foam pad.

4. Remove the 2 screws and position aside the lumbar adjust control.

5. Release the lumbar support from the backrest frame wires and remove.

6. To install, reverse the removal procedure.

7. Install the front seat backrest cover. See Front Seat Backrest Cover Removal/Installation.

8. Repower the supplemental restraint system (SRS). See Supplemental Restraint System (SRS) Depowering and Repowering.