Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.1 REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

CAUTION:
- Be careful not to hit the sensor element or allow foreign matter to get on it during sensor removal/installation. If the sensor element is hit or foreign matter gets on it, an error may occur in the sensor output signal resulting in deterioration in the engine control.

NOTE:
- Because the IAT sensor No.1 is integrated in the MAF sensor, replacing the IAT sensor No.1 includes replacement of the MAF sensor/IAT sensor No.1.

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable. Removal and Replacement

3. Disconnect the MAF sensor/IAT sensor No.1 connector.

4. Remove the MAF sensor/IAT sensor No.1.






5. Install in the reverse order of removal.