Power Window System Initialization Procedure

POWER WINDOW SYSTEM INITIALIZATION PROCEDURE

NOTE:
- If the following operations have been performed, initial setting is reset, and auto up/down and two-step down operation are disabled. Therefore, performing initial setting is necessary.

- Negative battery cable is disconnected.

- Power window main switch connector is disconnected.

- Power window system power supply fuse is removed.

1. Switch the ignition to ON.

2. Press the driver's seat switch to fully open the door glass.

3. Pull up the driver's seat switch to the manual-up position to fully close the door glass and keep holding the switch up at the position for approx. 2 s.