Evaporative Emission Control Canister: Testing and Inspection

CHARCOAL CANISTER INSPECTION [L3 WITH TC]

1. Remove the charcoal canister. (See Service and Repair.)

2. Plug ports A and C, then blow air into port B.






CAUTION:
- Do not apply the pressure more than 20 kPa {0.2 kgf/cm2, 2.9 psi} to the charcoal canister. Doing so will damage the charcoal canister.

3. Verify that there is no air leakage from the case.

- If not as specified, replace the charcoal canister. (See Service and Repair.)