Full-Auto Air Conditioner

REFRIGERANT PRESSURE SENSOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

1. Disconnect the negative battery cable.

2. Discharge the refrigerant from the system. Refrigerant Recovery Refrigerant Charging

3. Loosen the refrigerant pressure sensor using two spanners.

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.

6. Perform the refrigerant system performance test. Refrigerant System Performance Test

Refrigerant Pressure Sensor Installation Note

1. Apply compressor oil to O-ring and connect the joint.