U2064

DTC U2064 [INSTRUMENT CLUSTER]





CAUTION:
- DTC U2064 is registered to the instrument cluster by a request from other modules and does not indicate a malfunction in the instrument cluster itself.
- DTC U2064 may not be cleared during engine starting even if DTC clearing is done using the M-MDS. When clearing DTC U2064, execute with the ignition switch in the ON position (Engine off).

Diagnostic Procedure

1. Verify the freeze frame data as follows:
a. Select the tool box tab.

b. Select "Electrical".

c. Select "IC Service Function".

d. Select "Freeze Frame Data".

2. Determine which unit is thought to be malfunctioning based on the freeze frame data.
NOTE:
- If several warning light illumination requests are received, they will be recorded in one freeze frame data.

x: Applicable-: Not applicable





3. Inspect the malfunctioning part.

- Repair or replace if necessary.

4. Clear the DTC from the memory. Clearing DTC - Instrument Cluster

5. Turn the ignition switch to the LOCK position.

6. Turn the ignition switch to the ON position and wait for 5 s more.

7. Verify that the DTC U2064 is displayed using the M-MDS.

- If the DTC U2064 is displayed, go back to Step 1.