DTC P0607 [WL-C, WE-C (Thailand, General (L.H.D. R.H.D.) specs.)]
id0102b0809500
|
DTC P0607 |
PCM performance problem |
|---|---|
|
DETECTION CONDITION
|
• PCM internal malfunction.
|
|
POSSIBLE CAUSE
|
• PCM internal malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY FREEZE FRAME DATA HAS BEEN RECORDED
• Has FREEZE FRAME DATA been recorded?
|
Yes
|
Go to the next step.
|
|
No
|
Record FREEZE FRAME DATA on repair order, then go to the next step.
|
||
|
2
|
VERIFY RELATED REPAIR INFORMATION AVAILABILITY
• Check for related service repair information availability.
• Is any related repair information available?
|
Yes
|
Perform repair or diagnosis according to available repair information.
• If vehicle is not repaired, go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY TROUBLESHOOTING OF P0607 COMPLETED
• Make sure to reconnect all disconnected connectors.
• Clear DTC from PCM memory using the M-MDS.
• Start the engine.
• Is same DTC present?
|
Yes
|
Replace the PCM, go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY AFTER REPAIR PROCEDURE
• Perform the “After Repair Procedure“.
• Are any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Troubleshooting completed.
|
||