REAR OIL SEAL REPLACEMENT [F2]

id011094800900

1.  Disconnect the negative battery cable.

2.  Remove the flywheel. (See CLUTCH UNIT REMOVAL/INSTALLATION [M15M-D, R15M-D, R15MX-D].)

3.  Remove in the order indicated in the table.

4.  Install in the reverse order of removal.

absggw00000032

1	Rear oil seal (See Rear Oil Seal Removal Note.) (See Rear Oil Seal Installation Note.)

Rear Oil Seal Removal Note

1.  Cut the oil seal lip using a razor knife.

2.  Remove the oil seal using a screwdriver protected with a rag.

absggw00000033

Rear Oil Seal Installation Note

1.  Apply clean engine oil to the new oil seal lip.

2.  Push the oil seal in evenly using the SST and a hammer.

3.  Tap the oil seal in evenly using the SST and a hammer.

arnffw00000862