GLOW PLUG CORD INSPECTION [WL-3]

id0113a9807100

1.  Remove the glow plug cord from glow plug. (See GLOW PLUG REMOVAL/INSTALLATION [WL-3].)

2.  Verify that the glow plug cord is not broken or bent.

Note

•  When inspecting for continuity in the glow plug cord, do not let the uncovered parts (A) come into contact with other parts and be shorted.

3.  Verify there is continuity at both ends of the glow plug cord.

•  If there is no continuity, replace the glow plug cord. (See GLOW PLUG REMOVAL/INSTALLATION [WL-3].)

dbg113awb308