INJECTION NOZZLE REMOVAL/INSTALLATION [WL-3]

id0114b5806000

Caution
•  Cover the outlet of the injection pipe and fuel hose with a rag.
•  Catch the fuel with a rag.

1.  Disconnect the negative battery cable.

2.  Complete the “BEFORE REPAIR PROCEDURE”. (See BEFORE REPAIR PROCEDURE [WL-3].)

3.  Remove the FICD solenoid valve bracket. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [WL-3].)

4.  Remove in the order indicated in the table.

5.  Install in the reverse order of removal.

6.  Complete the “AFTER REPAIR PROCEDURE”. (See AFTER REPAIR PROCEDURE [WL-3].)

dbg114awb024

1
Injection pipe (See Injection Pipe Installation Note.)
2
Fuel leak pipe
3
Fuel leak washer
4
Injection nozzle (See Injection Nozzle Installation Note.)
5
Nozzle washer
6
Corrugated gasket (See Corrugated Gasket Installation Note.)


Corrugated Gasket Installation Note

•  Install each bead side facing combustion chamber.

Injection Nozzle Installation Note

•  Install each injection nozzle onto the fuel injection pump, matching their identification color rings as shown.
dbg114awb025

Injection Pipe Installation Note

•  Install the injection pipe in the order indicated in the figure.
dbg114awb039