VEHICLE SPEED SENSOR (VSS) INSPECTION [S15MX-D]

id0316a8153300

1.  Remove the VSS. (See VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION [S15MX-D].)

2.  Measure voltage between terminals of the VSS while the gear is turning.

absggw00001711

Vehicle speed sensor (VSS) voltage [S15MX-D]
5 V or less
•  If the voltage is within the specification, the VSS is normal. Repair the related wiring harness.
•  If the voltage is not within the specification (tester needle does not move), replace the VSS.

3.  Install the VSS. (See VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION [S15MX-D].)