FRONT DOOR UNIT REMOVAL/INSTALLATION

id091100800500

1.  Raise the rear edge of the front door glass 80 mm {3.1 in} from the fully lowered position.

2.  Disconnect the negative battery cable.

3.  Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

4.  Remove the door screen.

5.  Remove the front door grass. (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

6.  Remove the front door inner handle. (See FRONT DOOR INNER HANDLE REMOVAL/INSTALLATION.)

7.  Disassemble in the order indicated in the table.

dcf911zwb005

1	Glass run channel
2	Front glass guide
3	Rear glass guide

8.  Assemble in the reverse order of disassembly.