Engine start/stop button installation

1) Install the engine start/stop button to the instrument panel (middle side).

Legend

2) Connect the connector to the instrument panel (middle side).

3) Install the instrument panel (middle side) to the instrument panel (lower side).

1) Install the meter cluster to the instrument panel.

Legend

Legend

1. Models equipped with display units

1) Connect the connector to the display unit.

2) Install the display unit as a set with the bezel to the instrument panel.

Legend

2. Models equipped with 2DIN audio

1) Install the 2DIN audio as a set with the bezel to the instrument panel.

Legend

1. Models without knee airbags

1) Connect the connector to the instrument panel driver-side lower cover.

2) Install the instrument panel driver-side lower cover to the instrument panel.

Legend

Legend

3) Install the hood lock control lever and fuel filler lid opener lever to the instrument panel driver-side lower cover.

Legend

Legend

4) Connect the wire to each lever.

1. Models with knee airbags

Refer to "8.Restraints 8B.Airbag Systems knee air bag installation".

1. Post procedures

1) Connect the battery cable to the battery negative terminal.

2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

3) Close the engine hood.