1. Component views
Rear seat belt (Crew cab)
Part name
- Rear pillar trim
- Rear end upper trim cover
- Rear end trim cover
- Rear pillar trim
- Rear tongue side seat belt (LH)
- Bolt
- Bolt
- Rear tongue side seat belt (CTR)
- Rear tongue side seat belt (RH)
- Rear buckle side seat belt
- Rear sill plate
Tightening torque
6: 46 N・m { 4.7 kgf・m / 34 lb・ft }
7: 8.2 N・m { 0.8 kgf・m / 73 lb・in }
Rear seat belt (Extend cab)
Part name
- Front door finisher
- Rear pillar upper trim cover
- Rear pillar lower trim cover
- Seat belt upper anchor bolt
- Rear tongue side seat belt (RH)
- Bolt
- Seat belt lower anchor bolt
- Rear buckle side seat belt
- Rear end trim cover
- Rear tongue side seat belt (LH)
- Front sill plate
Tightening torque
4: 46 N⋅m {4.7 kgf⋅m / 34 lb⋅ft}
6: 46 N⋅m {4.7 kgf⋅m / 34 lb⋅ft}
7: 46 N⋅m {4.7 kgf⋅m / 34 lb⋅ft}
2. Rear buckle side seat belt installation
1) Install the rear buckle side seat belt to the floor panel.
Tightening torque: 46 N・m { 4.7 kgf・m / 34 lb・ft }
Crew cab
Legend
- Rear buckle side seat belt (RH)
- Rear buckle side seat belt (LH)
Extend cab
Legend
- Rear buckle side seat belt (RH)
- Rear buckle side seat belt (LH)
2) Connect the connector to the rear buckle side seat belt.
3. Rear end trim cover installation
4. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.