1. Component views
Rear output shaft oil seal
Part name
- Rear output shaft oil seal
- Rear propeller shaft
2. Transfer reassembly
1) Clean the oil seal installation section and the surrounding area.
Caution
- Ensure that there are no burrs, etc., around the oil seal mounting section.
2) Apply the recommended oil or equivalent to the outer surface of the rear output shaft oil seal.
Caution
- Do not reuse the oil seal.
3) Install the rear output shaft oil seal to the transfer case using the special tool.
SST: 5-8840-3162-0 - oil seal installer
Caution
- When press-fitting, take care not to damage the lip section of the oil seal.
Legend
- 5-8840-3162-0
Legend
- Rear output shaft oil seal
- Main shaft
- 5-8840-3162-0
Standard value
a: 3.5 to 4.5 mm { 0.138 to 0.177 in }