Window at the passenger side does not operate

1. Pre-check and visual inspection

1) Check the power window operation.

Check that all power windows other than the passenger side window are operative.

2) Check for any interference from aftermarket electronic components such as two-way radios or lights.

Turn OFF or remove any aftermarket electronic components to ensure that there is no influence on inspections or operations.

2. Components inspection

1) Inspect the passenger side power window switch and that of the driver seat.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch inspection".

Replace the power window switch if a malfunction is found.

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch removal".

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch installation".

Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".

2) Inspect the passenger side power window motor.

Replace the power window motor if a malfunction is found.

3. Inspection of circuit

1) Check that the harnesses and connectors are normal.

Inspect for the following circuits for an open circuit, short, poor connections at the connectors, and abnormal conditions such as worn or bent harnesses.

Refer to "201.General Information 14A.Service Information Guide Preliminary and post procedures".