Actuator installation

1. Component views

Actuator (Auto A/C)

Part name

  1. Blower
  2. Heater evaporator unit
  3. Mode actuator
  4. Mix actuator (Passenger side)
  5. Mix actuator (Driver side)
  6. Rear ventilation duct actuator
  7. Intake actuator

Actuator (Manual A/C)

Part name

  1. Blower
  2. Heater evaporator unit
  3. Mode actuator
  4. Mix actuator

2. Actuator installation

1. Models with auto A/C

1) Install the following actuators to the heater evaporator unit and blower.

  • Mode actuator
  • Mix actuator (Passenger side)
  • Mix actuator (Driver side)
  • Rear ventilation duct actuator
  • Intake actuator

2) Connect the connectors to the following actuators.

  • Mode actuator
  • Mix actuator (Passenger side)
  • Mix actuator (Driver side)
  • Rear ventilation duct actuator
  • Intake actuator

2. Models with manual A/C

1) Install the mix actuator to the heater evaporator unit.

2) Install the mode actuator and cover as a set to the heater evaporator unit.

Legend

  1. Mode actuator
  2. Cover

3. Instrument panel installation

Refer to "9.Body, Cab, Accessories 9L.Exterior, Interior Trim instrument panel installation".

Copyright Mazda Motor Corporation. All rights reserved.