Primary specifications of transmission, transaxle (MVL)

1. Primary specifications of transmission, transaxle

Transmission primary specifications
Model
MVL6S
MVL6Y
Transmission type
Full synchronous type forward/reverse gear
Control method
Direct control by gear shift lever on floor
Gear ratio
1st
4.942
4.942
2nd
2.452
2.686
3rd
1.428
1.527
4th
1.000
1.000
5th
0.749
0.749
6th
0.634
0.634
Rev
4.597
4.597
Oil level [Reference value]
2.8 L { 0.74 US gal / 0.62 Imp.gal }

Note

  • For the lubricant type, refer to the following.

Refer to "201.General Information 14B.Vehicle Information recommended fluids, lubricants and diesel fuels".

Clutch primary specifications
Model
MVL
Clutch type
Dry-type single plate (With diaphragm)
Control method
Oil pressure
Pressure plate
Outer diameter
275 mm { 10.83 in }
Inner diameter
190 mm { 7.48 in }
Installation load (RZ4E)
6,860 N { 700 kg / 1,542 lb }
Installation load (4JJ3)
8,140 N { 830 kg / 1,830 lb }
Clutch disc (Except dual mass flywheel)
Assembly thickness (When free)
8.1 mm { 0.319 in }
Assembly thickness (When compressed)
7.4 mm { 0.291 in }
Clutch disc (Dual mass flywheel)
Assembly thickness (When free)
8.3 mm { 0.327 in }
Assembly thickness (When compressed)
7.7 mm { 0.303 in }
Clutch pedal
Clutch pedal play (Reference value)
5.0 to 15.0 mm { 0.2 to 0.6 in }
Clutch master cylinder
Inner diameter x stroke
15.87 x 36.00 mm {0.625 x 1.417 in}
Slave cylinder
Inner diameter x stroke
20.64 x 19.00 mm {0.813 x 0.748 in}