1. Shift fork installation
1) Apply EXXON MOBILE RONEX MP Grease or equivalent to the support bolt contact surface and slave cylinder push rod contact surface.
Standard: 3.0 g { 0.11 oz } Support bolt contact surface
Standard: 1.0 to 2.5 g { 0.04 to 0.09 oz } Slave cylinder push rod contact surface
Legend
- Slave cylinder push rod contact surface
- Support bolt contact surface
2) Install the shift fork to the clutch housing.
Caution
- Check that the support bolt is securely fitted into the indentation on the shift fork.
Legend
- Indentation on the shift fork
- Support bolt
2. Release bearing installation
1) Apply EXXON MOBILE RONEX MP grease or equivalent to the surface that makes contact with the shift fork.
Caution
- Do not apply grease to the inner surface of the sleeve.
Standard: 1.5 to 2.5 g { 0.05 to 0.09 oz } Total amount of 2 locations
Legend
- Contact surface with the shift fork
2) Install the release bearing to the shift fork.