1. Component views
Crankshaft rear oil seal
Part name
- Crankshaft rear oil seal
2. Crankshaft rear oil seal installation
1) Install the crankshaft rear oil seal and slinger to the crankshaft using the special tool.
Caution
- Do not reuse the crankshaft rear oil seal.
SST: 5-8840-3225-0 - oil seal installer
2) Check the dimension of the crankshaft end face and the crankshaft rear oil seal end face.
Legend
- Crankshaft rear oil seal
- Flywheel housing
- Crankshaft rear slinger
- Crankshaft
Standard value
a: 2.7 to 3.3 mm { 0.106 to 0.130 in }