A/C compressor magnet clutch removal

1. Component views

A/C compressor magnetic clutch (4JJ3 models with auto A/C, except M/T models (Euro 5 or above))

Part name

Tightening torque

1: 25 N・m { 2.5 kgf・m / 18 lb・ft }

A/C compressor magnetic clutch (4JJ3 models with auto A/C, M/T models (Euro 5 or above))

Part name

Tightening torque

1: 25 N・m { 2.5 kgf・m / 18 lb・ft }

A/C compressor magnetic clutch (Models with RZ4E and auto A/C)

Part name

Tightening torque

1: 25 N・m { 2.5 kgf・m / 18 lb・ft }

A/C compressor magnetic clutch (Models with manual A/C, M/T models (Euro 5 or above))

Part name

Tightening torque

1: 13 N・m { 1.3 kgf・m / 115 lb・in }

A/C compressor magnetic clutch (Models with manual A/C, except M/T models (Euro 5 or above))

Part name

Tightening torque

1: 13 N・m { 1.3 kgf・m / 115 lb・in }

1) Remove the drive plate from the A/C compressor.

Note

SST: 5-8840-4056-0 - flange holder

Legend

2) Remove the shim from the A/C compressor.

3) Remove the snap ring from the A/C compressor.

4) Remove the pulley from the A/C compressor using the special tool.

SST: 5-8840-0121-0 - pulley puller pilot

SST: 5-8840-0111-0 - puller

Legend

5) Remove the snap ring, and remove the field coil from the A/C compressor.