Primary specifications of driveline, axle

1. Main Data and Specifications for Front Axle

Ring gear size	194 mm { 7.64 in }
Axle type	BANJO
Gear type	Hypoid gear
Differential type	2 pinions
Speed reduction ratio	3.583 (43/12)
	3.727 (41/11)
	3.909 (43/11)
	4.100 (41/10)
	4.300 (43/10)
Lubricant capacity (Reference value)	1.24 L { 0.33 US gal / 0.27 Imp.gal }

Refer to "201.General Information 14B.Vehicle Information recommended fluids, lubricants and diesel fuels".

2. Rear axle primary specifications

Ring gear size	220 mm { 8.66 in }
Axle type	BANJO, semi-floating
Gear type	Hypoid gear
Differential type	2 pinions
Speed reduction ratio	3.416 (41/12)
	3.583 (43/12)
	3.727 (41/11)
	3.909 (43/11)
	4.100 (41/10)
	4.300 (43/10)
Lubricant capacity (Reference value)	2.1 L { 0.55 US gal / 0.46 Imp.gal } Models with differential locks
	2.2 L { 0.58 US gal / 0.48 Imp.gal } Models without differential lock

Refer to "201.General Information 14B.Vehicle Information recommended fluids, lubricants and diesel fuels".

3. Rear propeller shaft assembly list

2WD

	4JJ3	RZ4E
AWR6B45	Two-piece type	Two-piece type
MVL-6S	Two-piece type	-
MVL-6Y	-	Two-piece type

4WD

	4JJ3	RZ4E
AWR6B45	One-piece type	One-piece type
MVL-6S	One-piece type	-
MVL-6Y	-	One-piece type

4. Transfer specifications

Type	Synchronized type gear shifting between two-wheel drive mode and four-wheel drive mode Planetary type gear shifting between Low and High
Control method	Gear shifts between "2H," "4H" and "4L" are remotely controlled by the center cluster panel or switch on the center console.
Gear ratio	High; 1.000 Low; 2.482
Oil capacity (Reference value)	1.3 L { 0.34 US gal / 0.29 Imp.gal }

Refer to "201.General Information 14B.Vehicle Information recommended fluids, lubricants and diesel fuels".