| DTC |
DTC title |
Condition for running the DTC |
Condition for setting the DTC |
Action taken when DTC sets |
| B0001[11] |
DTC B0001[11] Driver Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the driver airbag deployment current output circuit voltage is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0001[12] |
DTC B0001[12] Driver Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the driver airbag deployment current output circuit voltage is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0001[1A] |
DTC B0001[1A] Driver Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver airbag, SRS coil, driver airbag deployment current output (High) circuit, driver airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0001[1B] |
DTC B0001[1B] Driver Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver airbag, SRS coil, driver airbag deployment current output (High) circuit, driver airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0004[11] |
DTC B0004[11] Driver Knee Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the driver knee airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0004[12] |
DTC B0004[12] Driver Knee Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the driver knee airbag deployment current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0004[1A] |
DTC B0004[1A] Driver Knee Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver knee airbag, SRS coil, driver knee airbag deployment current output (High) circuit, driver knee airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0004[1B] |
DTC B0004[1B] Driver Knee Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver knee airbag, SRS coil, driver knee airbag deployment current output (High) circuit, driver knee airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0010[11] |
DTC B0010[11] Passenger Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the passenger airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0010[12] |
DTC B0010[12] Passenger Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the passenger airbag deployment current output circuit voltage is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0010[1A] |
DTC B0010[1A] Passenger Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the passenger airbag, passenger airbag deployment current output (High) circuit, passenger airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0010[1B] |
DTC B0010[1B] Passenger Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the passenger airbag, passenger airbag deployment current output (High) circuit, passenger airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0020[11] |
DTC B0020[11] Passenger Side Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the passenger side airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0020[12] |
DTC B0020[12] Passenger Side Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the passenger side airbag deployment current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0020[1A] |
DTC B0020[1A] Passenger Side Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the passenger side airbag, passenger side airbag deployment current output (High) circuit, passenger side airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0020[1B] |
DTC B0020[1B] Passenger Side Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the passenger side airbag, passenger side airbag deployment current output (High) circuit, passenger side airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0021[11] |
DTC B0021[11] Passenger Curtain Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the passenger curtain airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0021[12] |
DTC B0021[12] Passenger Curtain Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the passenger curtain airbag deployment current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0021[1A] |
DTC B0021[1A] Passenger Curtain Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the passenger curtain airbag, passenger curtain airbag deployment current output (High) circuit, passenger curtain airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0021[1B] |
DTC B0021[1B] Passenger Curtain Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the passenger curtain airbag, passenger curtain airbag deployment current output (High) circuit, passenger curtain airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0028[11] |
DTC B0028[11] Driver Side Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the driver side airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0028[12] |
DTC B0028[12] Driver Side Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the driver side airbag deployment current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0028[1A] |
DTC B0028[1A] Driver Side Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver side airbag, driver side airbag deployment current output (High) circuit, driver side airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0028[1B] |
DTC B0028[1B] Driver Side Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver side airbag, driver side airbag deployment current output (High) circuit, driver side airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0029[11] |
DTC B0029[11] Driver Curtain Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the driver curtain airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0029[12] |
DTC B0029[12] Driver Curtain Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the driver curtain airbag deployment current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0029[1A] |
DTC B0029[1A] Driver Curtain Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver curtain airbag, driver curtain airbag deployment current output (High) circuit, driver curtain airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0029[1B] |
DTC B0029[1B] Driver Curtain Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the driver curtain airbag, driver curtain airbag deployment current output (High) circuit, driver curtain airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0070[11] |
DTC B0070[11] Pretensioner(Front Right) Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the front right side pretensioner ignition current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0070[12] |
DTC B0070[12] Pretensioner(Front Right) Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the front right side pretensioner ignition current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0070[1A] |
DTC B0070[1A] Pretensioner(Front Right) Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the front right side seat belt with pretensioner, front right side pretensioner ignition current output (High) circuit, front right side pretensioner ignition current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0070[1B] |
DTC B0070[1B] Pretensioner(Front Right) Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the front right side seat belt with pretensioner, front right side pretensioner ignition current output (High) circuit, front right side pretensioner ignition current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0072[11] |
DTC B0072[11] Pretensioner(Front Left) Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the front left side pretensioner ignition current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0072[12] |
DTC B0072[12] Pretensioner(Front Left) Circuit Short to Battery Voltage |
・The ignition power supply is normal. |
・The SRS control unit detects that the voltage of the front left side pretensioner ignition current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0072[1A] |
DTC B0072[1A] Pretensioner(Front Left) Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the front left side seat belt with pretensioner, front left side pretensioner ignition current output (High) circuit, front left side pretensioner ignition current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0072[1B] |
DTC B0072[1B] Pretensioner(Front Left) Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the front left side seat belt with pretensioner, front left side pretensioner ignition current output (High) circuit, front left side pretensioner ignition current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0073[11] |
DTC B0073[11] Pretensioner(Rear Left) Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the rear left side pretensioner ignition current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0073[12] |
DTC B0073[12] Pretensioner(Rear Left) Circuit Short to Battery Voltage |
・The ignition power supply is normal. |
・The SRS control unit detects that the voltage of the rear left side pretensioner ignition current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0073[1A] |
DTC B0073[1A] Pretensioner(Rear Left) Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the rear left side seat belt with pretensioner, rear left side pretensioner ignition current output (High) circuit, rear left side pretensioner ignition current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0073[1B] |
DTC B0073[1B] Pretensioner(Rear Left) Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the rear left side seat belt with pretensioner, rear left side pretensioner ignition current output (High) circuit, rear left side pretensioner ignition current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0075[11] |
DTC B0075[11] Pretensioner(Rear Right) Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the rear right side pretensioner ignition current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0075[12] |
DTC B0075[12] Pretensioner(Rear Right) Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the rear right side pretensioner ignition current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0075[1A] |
DTC B0075[1A] Pretensioner(Rear Right) Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the rear right side seat belt with pretensioner, rear right side pretensioner ignition current output (High) circuit, rear right side pretensioner ignition current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B0075[1B] |
DTC B0075[1B] Pretensioner(Rear Right) Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the rear right side seat belt with pretensioner, rear right side pretensioner ignition current output (High) circuit, rear right side pretensioner ignition current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B0090[09] |
DTC B0090[09] Front Airbag Sensor(Left) Malfunction |
- |
Any of the following conditions are met: ・The SRS control unit detects an abnormal left side front airbag sensor signal. ・The SRS control unit detects a left side front airbag sensor malfunction. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0090[13] |
DTC B0090[13] Front Airbag Sensor(Left) Disconnected |
- |
Any of the following conditions are met: ・The left side front airbag sensor cannot be initialized. ・Communication cannot be established with the left side front airbag sensor, or the SRS control unit detects a CRC error in the receiving data. |
・SRS airbag warning light illuminates. |
| B0091[09] |
DTC B0091[09] Passenger Door Side Airbag Sensor Malfunction |
- |
Any of the following is met: ・The SRS control unit detects an abnormal passenger door side airbag sensor signal. ・The SRS control unit detects a malfunction in the passenger door side airbag sensor. ・The SRS control unit detects that the output difference between the driver door side airbag sensor signal and the passenger door side airbag sensor signal is large. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0091[13] |
DTC B0091[13] Passenger Door Side Airbag Sensor Disconnected |
- |
Any of the following are met: ・The passenger door side airbag sensor cannot be initialized. ・Communication cannot be established with the passenger door side airbag sensor, or the SRS control unit detects a CRC error in the received data. |
・SRS airbag warning light illuminates. |
| B0092[09] |
DTC B0092[09] Floor Side Airbag Sensor(Passenger Side) Malfunction |
- |
Any of the following are met: ・The SRS control unit detects an abnormal passenger floor side airbag sensor signal. ・The SRS control unit detects a malfunction in the passenger floor side airbag sensor. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0092[13] |
DTC B0092[13] Floor Side Airbag Sensor(Passenger Side) Disconnected |
- |
Any of the following are met: ・The passenger floor side airbag sensor cannot be initialized. ・Communication cannot be established with the passenger floor side airbag sensor, or the SRS control unit detects a CRC error in the received data. |
・SRS airbag warning light illuminates. |
| B0093[09] |
DTC B0093[09] Rear Side Airbag Sensor(Passenger Side) Malfunction |
- |
Any of the following are met: ・The SRS control unit detects an abnormal passenger rear side airbag sensor signal. ・The SRS control unit detects a malfunction in the passenger rear side airbag sensor. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0093[13] |
DTC B0093[13] Rear Side Airbag Sensor(Passenger Side) Disconnected |
- |
Any of the following are met: ・The passenger rear side airbag sensor cannot be initialized. ・Communication cannot be established with the passenger rear side airbag sensor, or the SRS control unit detects a CRC error in the received data. |
・SRS airbag warning light illuminates. |
| B0095[09] |
DTC B0095[09] Front Airbag Sensor(Right) Malfunction |
- |
Any of the following conditions are met: ・The SRS control unit detects an abnormal right side front airbag sensor signal. ・The SRS control unit detects a right side front airbag sensor malfunction. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0095[13] |
DTC B0095[13] Front Airbag Sensor(Right) Disconnected |
- |
Any of the following conditions are met: ・The right side front airbag sensor cannot be initialized. ・Communication cannot be established with the right side front airbag sensor, or the SRS control unit detects a CRC error in the receiving data. |
・SRS airbag warning light illuminates. |
| B0096[09] |
DTC B0096[09] Driver Door Side Airbag Sensor Malfunction |
- |
Any of the following is met: ・The SRS control unit detects an abnormal driver door side airbag sensor signal. ・The SRS control unit detects a malfunction in the driver door side airbag sensor. ・The SRS control unit detects that the output difference between the driver door side airbag sensor signal and the passenger door side airbag sensor signal is large. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0096[13] |
DTC B0096[13] Driver Door Side Airbag Sensor Disconnected |
- |
Any of the following are met: ・The driver door side airbag sensor cannot be initialized. ・Communication cannot be established with the driver door side airbag sensor, or the SRS control unit detects a CRC error in the received data. |
・SRS airbag warning light illuminates. |
| B0097[09] |
DTC B0097[09] Floor Side Airbag Sensor(Driver Side) Malfunction |
- |
Any of the following are met: ・The SRS control unit detects an abnormal driver floor side airbag sensor signal. ・The SRS control unit detects a malfunction in the driver floor side airbag sensor. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0097[13] |
DTC B0097[13] Floor Side Airbag Sensor(Driver Side) Disconnected |
- |
Any of the following are met: ・The driver floor side airbag sensor cannot be initialized. ・Communication cannot be established with the driver floor side airbag sensor, or the SRS control unit detects a CRC error in the received data. |
・SRS airbag warning light illuminates. |
| B0098[09] |
DTC B0098[09] Rear Side Airbag Sensor(Driver Side) Malfunction |
- |
Any of the following are met: ・The SRS control unit detects an abnormal driver rear side airbag sensor signal. ・The SRS control unit detects a malfunction in the driver rear side airbag sensor. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B0098[13] |
DTC B0098[13] Rear Side Airbag Sensor(Driver Side) Disconnected |
- |
Any of the following are met: ・The driver rear side airbag sensor cannot be initialized. ・Communication cannot be established with the driver rear side airbag sensor, or the SRS control unit detects a CRC error in the received data. |
・SRS airbag warning light illuminates. |
| B1053[1F] |
DTC B1053[1F] Connector Error |
- |
・The SRS control unit detects that there is no continuity in the connection check terminals (pins 21 and 22 of B9, pins 23 and 24 of R6, pins 23 and 24 of R7) via the connector. |
・SRS airbag warning light illuminates. |
| B1053[49] |
DTC B1053[49] ECU Malfunction |
- |
・A malfunction is detected in the SRS control unit. |
・SRS airbag warning light illuminates. |
| B1053[52] |
DTC B1053[52] Non Deployment Mode |
- |
・The SRS control unit is detected to be not in permission deployment mode. |
・SRS airbag warning light flashes. |
| B1053[57] |
DTC B1053[57] Vehicle Variant Missing |
- |
・The SRS control unit detects that the combination of the SRS control unit and SRS harness is improper. |
・SRS airbag warning light illuminates. |
| B1053[A2] |
DTC B1053[A2] Battery Voltage Malfunction Low |
- |
・The SRS control unit detects that the ignition voltage is 9 V or less for 1 consecutive minute. |
・SRS airbag warning light illuminates. |
| B1053[A3] |
DTC B1053[A3] Battery Voltage Malfunction High |
- |
・The SRS control unit detects that the ignition voltage is 16 V or more for 2 consecutive seconds. |
・SRS airbag warning light illuminates. |
| B130C[07] |
DTC B130C[07] Cut Off Indicator Malfunction |
- |
・The SRS control unit detects an abnormal voltage in the passenger side SRS airbag ON indicator light control circuit or passenger side SRS airbag OFF indicator light control circuit. |
・SRS airbag warning light illuminates. ・If an abnormal voltage of the passenger side SRS airbag ON indicator light control circuit is detected, the passenger side SRS airbag ON indicator light illumination control is tuned OFF within 1 second. ・If an abnormal voltage of the passenger side SRS airbag OFF indicator light control circuit is detected, the passenger side SRS airbag OFF indicator light illumination control is tuned OFF within 1 second. |
| B130D[07] |
DTC B130D[07] Cut Off Switch Malfunction |
- |
・The SRS control unit detects a malfunction in the passenger side SRS airbag cut off switch (+) input circuit or passenger side SRS airbag cut off switch (-) input circuit. |
・The SRS airbag warning light illuminates. ・Regardless of whether the passenger side SRS airbag cut off switch is ON or OFF, the SRS control unit permits the passenger airbag and passenger side airbag to deploy. |
| B1900[00] |
DTC B1900[00] Driver Airbag Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1901[00] |
DTC B1901[00] Passenger Airbag Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1902[00] |
DTC B1902[00] Side Airbag Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1903[00] |
DTC B1903[00] Curtain Airbag Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1904[00] |
DTC B1904[00] Rear Pretensioner Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1905[00] |
DTC B1905[00] Knee Airbag Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1906[00] |
DTC B1906[00] Far Side Airbag Circuit Activated(Crash) |
- |
・The SRS control unit detects a frontal collision greater than a predetermined level. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B190F[00] |
DTC B190F[00] Disposal Command Record |
- |
・The SRS control unit detects that the SRS airbag batch activation processing system activates the SRS airbag and pretensioner. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1E17[00] |
DTC B1E17[00] ECU Internal Airbag Sensor Malfunction |
- |
・A malfunction is detected in the SRS control unit. |
・SRS airbag warning light illuminates. |
| B1E19[00] |
DTC B1E19[00] Rear Pretensioner Misassemble |
- |
・The SRS control unit detects that the combination of the SRS control unit and SRS harness is improper. It may not be set when there are malfunctions with both the SRS control unit and the SRS harness. |
・SRS airbag warning light illuminates. |
| B1E1A[11] |
DTC B1E1A[11] Far Side Airbag Circuit Short to GND |
- |
・The SRS control unit detects that the voltage of the far side airbag deployment current output circuit is less than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1E1A[12] |
DTC B1E1A[12] Far Side Airbag Circuit Short to Battery Voltage |
- |
・The SRS control unit detects that the voltage of the far side airbag deployment current output circuit is more than the specified value. |
・The SRS airbag warning light illuminates. ・Even if the condition returns to normal, the warning light does not turn OFF until the DTC is cleared. |
| B1E1A[1A] |
DTC B1E1A[1A] Far Side Airbag Circuit Low Resistance |
- |
・The SRS control unit detects that the composite resistance of the far side airbag, far side airbag deployment current output (High) circuit, far side airbag deployment current output (Low) circuit, and connector terminal contact point is less than the specified value. |
・SRS airbag warning light illuminates. |
| B1E1A[1B] |
DTC B1E1A[1B] Far Side Airbag Circuit High Resistance |
- |
・The SRS control unit detects that the composite resistance of the far side airbag, far side airbag deployment current output (High) circuit, far side airbag deployment current output (Low) circuit, and connector terminal contact point is more than the specified value. |
・SRS airbag warning light illuminates. |
| B1E1F[00] |
DTC B1E1F[00] Driver Knee Airbag Misassemble |
- |
・The SRS control unit detects that the combination of the SRS control unit and SRS harness is improper. It may not be set when there are malfunctions with both the SRS control unit and the SRS harness. |
・SRS airbag warning light illuminates. |
| B1E20[00] |
DTC B1E20[00] Passenger Knee Airbag Misassemble |
- |
・The SRS control unit detects that the combination of the SRS control unit and SRS harness is improper. It may not be set when there are malfunctions with both the SRS control unit and the SRS harness. |
・SRS airbag warning light illuminates. |
| U0055[88] |
DTC U0055[88] CAN Bus Communication Error |
- |
・The SRS control unit detects a malfunction in the CAN communication circuit. |
・SRS airbag warning light illuminates. |