DTC P0607 Internal Control Module Error (Cruise Cut) (4JJ3 with DPD)

1. DTC P0607 description

This diagnosis applies to the microprocessor inside the ECM.

2. Condition for setting DTC P0607

Condition for setting the DTC

  • The ECM detects an abnormal calculated value due to the internal CPU.

3. Action taken when DTC P0607 sets

  • The ECM illuminates the MIL. Refer to Action taken when DTC sets - Type A.

Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 with DPD) DTC type definitions".

4. Condition for clearing DTC P0607

  • Refer to Conditions for clearing the MIL/DTC - Type A or Type B.

Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 with DPD) DTC type definitions".

Copyright Mazda Motor Corporation. All rights reserved.