1. DTC B0095[13] DTC description
The front airbag sensor detects a frontal collision and converts it into electrical signals. The SRS control unit supplies power to the front airbag sensor. When the front airbag sensor detects an impact more than or equal to a certain level, the impact is converted into electrical signals and transmitted to the SRS control unit. The SRS control unit deploys the SRS airbag according to the signals sent from the front airbag sensor. If the SRS control unit detects a malfunction in the right side front airbag sensor, in the right side front airbag sensor power supply circuit, or in the ground circuit, the DTC is set.
2. Condition for setting DTC B0095[13]
Any of the following conditions are met:
- The right side front airbag sensor cannot be initialized.
- Communication cannot be established with the right side front airbag sensor, or the SRS control unit detects a CRC error in the receiving data.
3. Action taken when DTC B0095[13] sets
- SRS airbag warning light illuminates.
Warning
- During the maintenance work, do not hit or shake the SRS control unit when handling it.
- If the SRS control unit is not properly installed, the SRS control unit may cause malfunctions. This may result in deployment of the SRS airbag and personal injury.
Caution
- To prevent the SRS parts to be replaced from malfunctioning and generating a battery short circuit, make sure to disconnect the battery cable before replacing the parts.