| DTC |
DTC title |
Condition for running the DTC |
Condition for setting the DTC |
Action taken when DTC sets |
| B1037[11] |
DTC B1037[11] (Flash Code 43) Leveling Power Supply "Circuit Short to Ground" |
・The ignition switch is ON. ・The headlight leveling actuator ON signal is output. |
・The headlight auto leveling control unit detects that the headlight leveling actuator power supply voltage is low. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| B1037[12] |
DTC B1037[12] (Flash Code 44) Leveling Power Supply "Circuit Short to Battery" |
・The ignition switch is ON. ・The headlight leveling actuators are OFF. |
・The headlight auto leveling control unit detects that the headlight leveling actuator power supply voltage is high for 5 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| B1037[15] |
DTC B1037[15] (Flash Code 51) +B Power Shutdown Circuit Failure |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects that the battery power cannot be cut off. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| B1037[44] |
DTC B1037[44] (Flash Code 52) +B Power Supply Latch Error (Data Error Detection) |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects an error in the stored data. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| B1037[49] |
DTC B1037[49] (Flash Code 54) Internal Failure of ECU |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects any abnormal conditions of the internal microprocessor. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| B1037[54] |
DTC B1037[54] (Flash Code 23) Vehicle Reference Position Not Initialized |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects that initialization of the vehicle height values is not performed. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light flashes. |
| B1103[04] |
DTC B1103[04] (Flash Code 24) G Sensor Failure |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects a malfunction in the G sensor for 10 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| C0040[81] |
DTC C0040[81] (Flash Code 32) Brake Switch Failure |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects an error in the stoplight switch data received from the ECM for 2 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| P0500[81] |
DTC P0500[81] (Flash Code 35) Vehicle Speed Sensor "A" Failure |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects an error in the wheel speed data received from the EHCU for 2 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| U0100[00] |
DTC U0100[00] (Flash Code 31）Lost Communication With ECM for Brake Signal |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects that the control information cannot be received from the ECM for 2 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| U0121[00] |
DTC U0121[00] (Flash Code 34) Lost Communication With Anti-Lock Brake System (ABS) Control Module |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects that the control information cannot be received from the EHCU for 2 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |
| U0140[00] |
DTC U0140[00] (Flash Code 33) Lost Communication With BCM |
・The ignition switch is ON. |
・The headlight auto leveling control unit detects that the control information cannot be received from the BCM for 2 seconds or more. |
・The headlight leveling actuator drive is stopped. ・The headlight automatic leveling warning light illuminates. |