| DTC |
DTC title |
Condition for running the DTC |
Condition for setting the DTC |
Action taken when DTC sets |
| B1033[54] |
DTC B1033[54] TPMS Not Programmed |
- |
・The wireless access module detects that all the tire air pressure sensor IDs are not registered. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1033[61] |
DTC B1033[61] TPMS Auto Location Error |
- |
・The wireless access module detects that the automatic location is not complete within the specified time. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1035[49] |
DTC B1035[49] Immobilizer IC Internal Circuit Failure |
- |
・The wireless access module detects a communication failure with the internal immobilizer IC. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1035[51] |
DTC B1035[51] Immobilizer Security Code Not Programmed |
- |
・The wireless access module detects that the security code is not programmed. |
・If the power mode is set to ACC or ON, the key monitor warning light remains ON. |
| B1084[09] |
DTC B1084[09] Electric Steering Lock Failure |
- |
・The wireless access module receives a failure message from the steering lock ECU. |
・Engine startup is inhibited. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・STEERING LOCK SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1084[29] |
DTC B1084[29] Invalid Data Received from Electric Steering Lock |
- |
・The wireless access module detects that signals from the steering lock ECU do not match for 5 seconds. |
・Engine startup is inhibited. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・STEERING LOCK SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1084[2F] |
DTC B1084[2F] Electric Steering Lock Signal Mismatch |
- |
・The wireless access module detects that the signal from the steering lock inhibition circuit and the signal from the steering lock ECU do not match for 5 seconds. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・STEERING LOCK SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1084[54] |
DTC B1084[54] Electric Steering Lock Not Programmed |
- |
・The wireless access module detects a non-programmed steering lock ECU. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・STEERING LOCK SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1084[81] |
DTC B1084[81] Lost Communication With Electric Steering Lock |
- |
・The wireless access module detects that messages from the steering lock ECU are not received for 4 seconds. |
・Engine startup is inhibited. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・STEERING LOCK SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1089[41] |
DTC B1089[41] EEPROM Checksum Failure |
- |
・The wireless access module detects EEPROM check sum errors. |
・The wireless access module stops authentication of the electronic key and ECM. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds for 10 seconds. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 10 seconds. |
| B1089[44] |
DTC B1089[44] ECU Failure (Data Memory Failure) |
- |
・The wireless access module detects an EEPROM malfunction. |
・The wireless access module stops authentication of the electronic key and ECM. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds for 10 seconds. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 10 seconds. |
| B1089[45] |
DTC B1089[45] ECU Failure (Program Memory Failure) |
- |
・The wireless access module detects ROM check sum errors. |
・The wireless access module stops authentication of the electronic key and ECM. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds for 10 seconds. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 10 seconds. |
| B1089[A2] |
DTC B1089[A2] Battery Voltage Low |
- |
Any of the following is met: ・When the request switch is pressed and the conditions for the door lock are met, the wireless access module detects that the battery power supply voltage is less than 10 V. ・When the engine start/stop button is pressed and the power mode turns ON, the wireless access module detects that the battery power supply voltage is less than 10 V. |
・The wireless access module inhibits door locking operations by way of the request switch. |
| B1089[F0] |
DTC B1089[F0] Security Lock Not Implemented |
- |
・The wireless access module detects that ECU Lock is not performed. |
- |
| B1309[14] |
DTC B1309[14] Push Start Switch Short to Ground or Open |
- |
・The wireless access module detects a malfunction in the engine start/stop button switch circuit. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B130A[11] |
DTC B130A[11] Driver Door Request Switch Circuit Short to Ground |
- |
・The wireless access module detects a short to ground in the driver side request switch signal circuit for 3 minutes or more. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B130B[11] |
DTC B130B[11] Assistant Door Request Switch Circuit Short to Ground |
- |
・The wireless access module detects a short to ground in the passenger side request switch signal circuit for 3 minutes or more. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1316[11] |
DTC B1316[11] TPMS Set Switch Circuit Short to Ground |
- |
・The wireless access module detects a short to ground in the TPMS load selector switch signal circuit for 3 minutes or more. |
・The tire air pressure specified value is set as the specified value for the loaded vehicle. |
| B170B[0A] |
DTC B170B[0A] External Buzzer Output Circuit Failure |
- |
・The wireless access module detects a malfunction in the external buzzer control circuit. |
・The wireless access module stops the external buzzer output. |
| B170C[0A] |
DTC B170C[0A] Indicator Output Circuit Failure |
- |
・When the key monitor warning light is commanded ON, the wireless access module detects a malfunction in the output circuit. |
・The wireless access module stops the output of the key monitor warning light. |
| B1E01[04] |
DTC B1E01[04] Ignition1 Internal Circuit Failure |
- |
・The wireless access module detects a malfunction in the IG1 circuit. |
・The lock control of the electric steering lock is inhibited. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. |
| B1E01[49] |
DTC B1E01[49] Ignition1 Relay Internal Circuit Failure |
- |
Any of the following are met: ・The wireless access module detects an overcurrent condition in the IG1 relay control circuit when the IG1 relay is commanded ON. ・The wireless access module detects an open circuit or short to the power supply in the IG1 relay control circuit when the IG1 relay is commanded OFF. |
・The lock control of the electric steering lock is inhibited. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. |
| B1E01[62] |
DTC B1E01[62] Ignition1 Relay Response Signal Mismatch |
- |
Any of the following are met: ・The wireless access module detects a low voltage condition in the IG1 feedback signal circuit when the IG1 relay is commanded ON. ・The wireless access module detects a high voltage condition in the IG1 feedback signal circuit when the IG1 relay is commanded OFF. |
・The lock control of the electric steering lock is inhibited. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. |
| B1E07[06] |
DTC B1E07[06] Unregistered Transponder Key Detection |
- |
・The wireless access module detects an electronic key whose electronic key ID is not programmed or cannot be authenticated. |
- |
| B1E07[09] |
DTC B1E07[09] Transponder Failure |
- |
・The wireless access module detects that the electronic key ID of the electronic key cannot be programmed. |
- |
| B1E08[13] |
DTC B1E08[13] Immobilizer Coil Circuit Open |
- |
・The wireless access module detects an open circuit in the immobilizer coil circuit. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1E09[04] |
DTC B1E09[04] Front Right TPMS Sensor Internal Circuit Failure |
- |
・The wireless access module detects the data error from the right front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E09[31] |
DTC B1E09[31] Front Right TPMS Sensor No Signal |
- |
・The wireless access module detects that the data cannot be received from the right front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E09[A2] |
DTC B1E09[A2] Front Right TPMS Sensor Battery Voltage Low |
- |
・The wireless access module receives the battery voltage decrease data from the right front tire air pressure sensor 15 times. |
- |
| B1E0A[04] |
DTC B1E0A[04] Front Left TPMS Sensor Internal Circuit Failure |
- |
・The wireless access module detects the data error from the left front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E0A[31] |
DTC B1E0A[31] Front Left TPMS Sensor No Signal |
- |
・The wireless access module detects that the data cannot be received from the left front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E0A[A2] |
DTC B1E0A[A2] Front Left TPMS Sensor Battery Voltage Low |
- |
・The wireless access module receives the battery voltage decrease data from the left front tire air pressure sensor 15 times. |
- |
| B1E0B[04] |
DTC B1E0B[04] Rear Right TPMS Sensor Internal Circuit Failure |
- |
・The wireless access module detects the data error from the right rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E0B[31] |
DTC B1E0B[31] Rear Right TPMS Sensor No Signal |
- |
・The wireless access module detects that the data cannot be received from the right rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E0B[A2] |
DTC B1E0B[A2] Rear Right TPMS Sensor Battery Voltage Low |
- |
・The wireless access module receives the battery voltage decrease data from the right rear tire air pressure sensor 15 times. |
- |
| B1E0C[04] |
DTC B1E0C[04] Rear Left TPMS Sensor Internal Circuit Failure |
- |
・The wireless access module detects the data error from the left rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E0C[31] |
DTC B1E0C[31] Rear Left TPMS Sensor No Signal |
- |
・The wireless access module detects that the data cannot be received from the left rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more. |
・The TPMS warning light illuminates after flashing for 63 seconds. |
| B1E0C[A2] |
DTC B1E0C[A2] Rear Left TPMS Sensor Battery Voltage Low |
- |
・The wireless access module receives the battery voltage decrease data from the left rear tire air pressure sensor 15 times. |
- |
| B1E0E[54] |
DTC B1E0E[54] Electronic Key Not Programmed |
- |
・The wireless access module detects that the electronic key ID is not programmed. |
・If the power mode is set to ACC or ON, the key monitor warning light remains ON. |
| B1E0E[A2] |
DTC B1E0E[A2] Electronic Key Battery Voltage Low |
- |
・The wireless access module detects that the battery voltage of the electronic key is extremely low 10 consecutive times. |
When the power mode is ACC or ON: ・LOW BATTERY ELECTRONIC KEY will be displayed on the multi-information display for 5 seconds. ・The buzzer built into the instrument panel cluster will sound 3 times. |
| B1E0F[02] |
DTC B1E0F[02] Driver Door LF Antenna Signal Failure |
- |
・The wireless access module detects a malfunction in the driver side external antenna circuit 5 consecutive times. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1E10[02] |
DTC B1E10[02] Assistant Door LF Antenna Signal Failure |
- |
・The wireless access module detects a malfunction in the passenger side external antenna circuit 5 consecutive times. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1E12[02] |
DTC B1E12[02] Center LF Antenna Signal Failure |
- |
・The wireless access module detects a malfunction in the center in-vehicle antenna circuit 5 consecutive times. |
・The wireless access module stops door locking and unlocking operations by way of the passive entry and start system function. When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1E15[02] |
DTC B1E15[02] RF Signal Failure |
- |
・The wireless access module detects a communication failure with the internal receiver 10 consecutive times. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| B1E1C[49] |
DTC B1E1C[49] Ignition2 Relay Internal Circuit Failure |
- |
Any of the following are met: ・The wireless access module detects an overcurrent condition in the IG2 relay control circuit when the IG2 relay is commanded ON. ・The wireless access module detects an open circuit or short to the power supply in the IG2 relay control circuit when the IG2 relay is commanded OFF. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1E1C[62] |
DTC B1E1C[62] Ignition2 Relay Response Signal Mismatch |
- |
Any of the following are met: ・The wireless access module detects a low voltage condition in the IG2 feedback signal circuit when the IG2 relay is commanded ON. ・The wireless access module detects a high voltage condition in the IG2 feedback signal circuit when the IG2 relay is commanded OFF. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1E1D[49] |
DTC B1E1D[49] ACC Relay Internal Circuit Failure |
- |
Any of the following are met: ・The wireless access module detects an overcurrent condition in the ACC relay control circuit when the ACC relay is commanded ON. ・The wireless access module detects an open circuit or short to the power supply in the ACC relay control circuit when the ACC relay is commanded OFF. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1E1D[62] |
DTC B1E1D[62] ACC Relay Response Signal Mismatch |
- |
Any of the following are met: ・The wireless access module detects a low voltage condition in the ACC feedback signal circuit when the ACC relay is commanded ON. ・The wireless access module detects a high voltage condition in the ACC feedback signal circuit when the ACC relay is commanded OFF. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| B1E1E[49] |
DTC B1E1E[49] Starter Output Relay Internal Circuit Failure |
- |
Any of the following are met: ・The wireless access module detects an overcurrent condition in the starter relay control circuit when the starter relay is commanded ON. ・The wireless access module detects an open circuit or short to the power supply in the starter relay control circuit when the starter relay is commanded OFF. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・POWER MANAGEMENT SYSTEM ERROR is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. |
| C0040[12] |
DTC C0040[12] Stop Lamp Switch Circuit Short to Battery |
- |
・The wireless access module detects that the stoplight switch is ON continuously for 15 minutes while the vehicle is running at 15 km/h {9 mph} or more. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P0500[86] |
DTC P0500[86] Invalid Data Received from Vehicle Speed Signal |
- |
・The wireless access module detects abnormal vehicle speed signals. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P0500[87] |
DTC P0500[87] Invalid Data Received from Vehicle Speed Sensor |
- |
・The wireless access module receives invalid vehicle speed data from the ECM 50 consecutive times. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P0701[54] |
DTC P0701[54] Transmission Not Learning |
・The transmission learning is not performed. ・The power mode is ON. |
・The wireless access module detects a malfunction in the transmission identification circuit during the transmission learning. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・The engine start/stop button indicator light (amber) flashes for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P07B2[62] |
DTC P07B2[62] Parking Position Signal Mismatch |
- |
・The wireless access module detects that the parking switch signal and P/N position switch signal do not match for 5 seconds. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P0830[13] |
DTC P0830[13] Clutch Switch Circuit Open |
- |
・The wireless access module detects that the clutch pedal is depressed (the clutch switch is OFF) continuously for 15 minutes. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P0830[17] |
DTC P0830[17] Clutch Switch Overvoltage Detection |
- |
・When the clutch high side circuit is commanded ON, the wireless access module detects a malfunction in the drive circuit. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| P0850[13] |
DTC P0850[13] P/N Detection Circuit Open |
- |
・The wireless access module detects that the shift lever is in the N position continuously for 15 minutes while the vehicle is running at 15 km/h {9 mph} or more. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| U0064[88] |
DTC U0064[88] CAN Communication Malfunction (CAN Bus Off) |
- |
・The wireless access module detects a CAN Bus OFF status. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| U0100[00] |
DTC U0100[00] Lost Communication With ECM |
・The power mode is ON. |
・The wireless access module detects that CAN Bus messages from the ECM are not received for 5 seconds. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| U0140[00] |
DTC U0140[00] Lost Communication With BCM |
- |
・The wireless access module detects that messages from the BCM are not received. |
When the engine start/stop button is pressed: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The buzzer built into the instrument panel cluster sounds 3 times. When the power mode is ON and there is a current failure: ・The key monitor warning light illuminates. When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds. ・The external buzzer sounds for 3 seconds. |
| U0155[00] |
U0155[00] Lost Communication With Meter |
・The power mode is ON. |
・The wireless access module detects that messages from the instrument panel cluster have not been received for 5 seconds or the data indicating a malfunction has been received 5 consecutive times. |
- |
| U0401[00] |
U0401[00] Lost Communication With Barometric Pressure Input Data |
・The power mode is ON. |
・The wireless access module detects that the barometric pressure data from the ECM has not been received for 5 seconds or the data indicating a malfunction has been received 2 consecutive times. |
- |
| U1821[86] |
U1821[86] Invalid Data Received from ABS |
・The power mode is ON. |
・The wireless access module detects that the wheel speed data from the EHCU has not been received for 5 seconds or the data indicating a malfunction has been received 25 consecutive times. |
- |
| U1B01[66] |
DTC U1B01[66] Unauthorized Signal Reception with ECM |
- |
・The wireless access module receives authentication requests from the ECM over 20 times in 1 ignition cycle. |
- |