1. DTC P0560 description
The ECM supplies 12 V power to the MAF sensor. The ECM monitors the voltage of the 12 V reference circuit. If the ECM detects an excessively low or high voltage, the DTC is set.
2. Condition for setting DTC P0560
Condition for running the DTC
- The battery voltage is 9 to 16 V.
Condition for setting the DTC
- The ECM detects that the voltage of the 12 V reference circuit is less than 9 V, or more than 16 V.
3. Action taken when DTC P0560 sets
- The ECM illuminates the MIL. Refer to Action taken when DTC sets - Type A.
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 with DPD) DTC type definitions".
- The ECM limits the fuel injection quantity.
- The ECM inhibits the cruise control.
- The ECM assumes a default oil level sensor (oil level) value.
4. Condition for clearing DTC P0560
- Refer to Conditions for clearing the MIL/DTC - Type A or Type B.
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 with DPD) DTC type definitions".