| DTC |
DTC title |
Condition for running the DTC |
Condition for setting the DTC |
Action taken when DTC sets |
| B1018[44] |
DTC B1018[44] ECU Failure(Data Memory Failure) |
- |
・The writing check for the RAM in the area the application uses is performed only once when the information module is activated, and an error occurs at least once. |
・The information module inhibits all operations. |
| B1018[45] |
DTC B1018[45] ECU Failure(Program Memory Failure) |
- |
・The checksum of the FLASH ROM area allocated for the application is calculated only once when the information module is activated, and the calculated value does not correspond with the checksum value stored inside. |
・The information module inhibits all operations. |
| B1018[55] |
DTC B1018[55] Vehicle Configuration Data Failure (Not Configured) |
・The ignition switch is ON. |
・The vehicle information remains at its initial values. |
- |
| U0055[00] |
DTC U0055[00] CAN(Chassis CAN) Circuit Malfunction |
・The ignition switch is ON. |
・The information module detects a CAN Bus OFF status for 5 seconds or more. |
- |
| U0100[00] |
DTC U0100[00] Lost Communication With ECM |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the ECM are not received for 5 seconds or more. |
- |
| U0101[00] |
DTC U0101[00] Lost Communication With TCM |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the TCM are not received for 5 seconds or more. |
- |
| U0102[00] |
DTC U0102[00] Lost Communication With TCCM |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the TCCM are not received for 5 seconds or more. |
- |
| U0126[00] |
DTC U0126[00] Lost Communication With Steering Angle Sensor Module |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the steering angle sensor are not received for 5 seconds or more. |
- |
| U0129[00] |
DTC U0129[00] Lost Communication With Brake System Control Module |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the EHCU are not received for 5 seconds or more. |
- |
| U0131[00] |
DTC U0131[00] Lost Communication With EPS |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the EPS motor control unit are not received for 5 seconds or more. |
- |
| U0140[00] |
DTC U0140[00] Lost Communication With Body Control Module |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the BCM are not received for 5 seconds or more. |
- |
| U0151[00] |
DTC U0151[00] Lost Communication With SRS Control Module |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the SRS control unit are not received for 5 seconds or more. |
- |
| U0155[00] |
DTC U0155[00] Lost Communication With Instrument Panel Cluster |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the instrument panel cluster are not received for 5 seconds or more. |
- |
| U0159[00] |
DTC U0159[00] Lost Communication With Parking Aid |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the parking aid system control unit are not received for 5 seconds or more. |
- |
| U0181[00] |
DTC U0181[00] Lost Communication With Head Light Auto Leveling |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the headlight auto leveling control unit are not received for 5 seconds or more. |
- |
| U01B0[00] |
DTC U01B0[00] Lost Communication With Battery Sensor |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the battery sensor are not received for 5 seconds or more. |
- |
| U1001[00] |
DTC U1001[00] Lost Communication With Stereo Camera Module |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the stereo camera are not received for 5 seconds or more. |
- |
| U100A[00] |
DTC U100A[00] Lost Communication With Diff Lock ECU |
・The ignition switch is ON. ・The ignition voltage is 10 V or more. |
・The information module detects that CAN messages from the rear differential lock control unit are not received for 5 seconds or more. |
- |