1. DTC P0219 description
The CKP sensor is installed to the left side of the rear of the cylinder block. The ECM calculates the engine speed and the accurate crankshaft position based on the signal pulse from the CKP sensor. If the ECM detects that the engine is in an overrun state, the DTC is set.
2. Condition for setting DTC P0219
Condition for setting the DTC
- The ECM detects that the engine speed is 5,000 rpm or more.
3. Action taken when DTC P0219 sets
- Euro4: The ECM does not illuminate the MIL or SVS indicator light. Refer to Action taken when DTC sets - Type D (Euro4).
- Except Euro4: The ECM does not illuminate the check engine warning light. Refer to Action taken when DTC sets - Type D (Except Euro4).
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC type definitions".
- The ECM limits the fuel injection quantity.
- The ECM inhibits the cruise control.
4. Condition for clearing DTC P0219
- Refer to Condition for clearing the DTC - Type D.
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC type definitions".