The ECM communicates with the wireless access module and performs the immobilizer function. The ECM sends a request signal to the wireless access module. The ECM receives a response signal from the wireless access module. Both communication signals are sent and received via the CAN communication circuit. If the ECM does not detect a response signal from the wireless access module, the DTC is set.
Condition for setting the DTC
Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC type definitions".
Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC type definitions".