1. DTC C172C[12] description
The BCM controls the clearance light output circuit and taillight output circuit according to the signal input from the light control switch, and it illuminates the clearance light and taillight. If the BCM detects a malfunction in the clearance light (right) output circuit or taillight (right) output circuit, the DTC is set.
2. Condition for setting DTC C172C[12]
Condition for running the DTC
- The BCM commands the clearance light (right) and taillight (right) OFF.
Condition for setting the DTC
Any of the following conditions are met:
- The BCM detects a short to the power supply in the clearance light (right) output circuit for 2.5 seconds or more.
- The BCM detects a short to the power supply in the taillight (right) output circuit for 2.5 seconds or more.
3. Action taken when DTC C172C[12] sets
- For models with MID, RH taillight failure is displayed.
- The output of the clearance light (right) or taillight (right) is turned ON regardless of the input light control switch signal.
- Current and past failures are set.