1. DTC C1707[12] description
When the back up light switch signal (MT models) or the reverse signal from the inhibitor switch (AT models) is input, the BCM controls the back up light output circuit and illuminates the back up light. If the BCM detects a malfunction in the back up light output circuit, the DTC is set.
2. Condition for setting DTC C1707[12]
Condition for running the DTC
- The BCM commands the back up light OFF.
Condition for setting the DTC
- The BCM detects a short to the power supply in the back up light output circuit for 2.5 seconds or more.
3. Action taken when DTC C1707[12] sets
- The output of the back up light is turned ON regardless of the input reverse signal.
- Current and past failures are set.