DTC C172D[49] Left Tail Light Output Circuit Internal Electronic Failure (BCM)

1. DTC C172D[49] description

The BCM controls the clearance light output circuit and taillight output circuit according to the signal input from the light control switch, and it illuminates the clearance light and taillight. Also, it turns ON the illumination light output circuit and supplies the power supply voltage to each circuit. If the BCM detects a malfunction in the clearance light (left) output circuit, taillight (left) output circuit, or illumination light output circuit, the DTC is set.

2. Condition for setting DTC C172D[49]

Condition for running the DTC

  • The BCM commands the clearance light (left), taillight (left), and illumination light ON.

Condition for setting the DTC

Any of the following conditions are met:

  • The BCM detects an internal malfunction in the clearance light (left) output circuit.
  • The BCM detects an internal malfunction in the taillight (left) output circuit.
  • The BCM detects an internal malfunction in the illumination light output circuit.

3. Action taken when DTC C172D[49] sets

  • For models with MID, LH taillight failure is displayed.
  • The output of the clearance light (left), taillight (left), or illumination light is stopped.
  • Current and past failures are set.
Copyright Mazda Motor Corporation. All rights reserved.